Spring Replacement

Some people prefer to do the work themselves to save money and it can be done in about 25 minutes.

Here are the steps on how to replace a torsion tube spring and also Spring Replacement Rancho Santa Margarita

First thing you with need are tools. Safety glasses to protect your eyes, winding bars, vice grips to set the cables and finally two wrenches: 9/16” and 7/16”. If you have power tools, it could be easier but it can also be done with everyday tools for Spring Replacement Rancho Santa Margarita.

About the tools you will need to use: First off all and the most important one of all is a pair of safety glasses, you need to keep your eyes protected at all times in case some dust comes into your eyes that you can still see perfectly. The next thing you are going to want to use are proper winding bars, it is very important to get them to wind the springs safely. Make sure the edges of your winding bars are at a 90 degree angle and not curved. If they are curved they might slip out form the socket when trying to wind the spring and you might lose your balance.

Next thing you will need is a set of vice grips which will be used to set the cables, grabbing the cables with your hands can be possible but may not be as effective and is not as safe. Finally, you will need two wrenches: a 9/16” wrench and an 7/16” wrench. It’s important to know that is you are going to use power tools, they can be useful but you have to be extra careful about the cables and where you plug them in. This is a very important thing and you need to keep this in mind at all times.